Acoustic Magic Microphone
Printed From: MSSpeech-Forum
Category: Windows™ Speech Recognition Forums
Forum Name: Handheld/Desktop
Forum Description: Microphones not needing wearing
URL: https://www.msspeech-forum.com/forum_posts.asp?TID=286
Printed Date: 13/Nov/2024 at 6:46pm
Software Version: Web Wiz Forums 12.02 - http://www.webwizforums.com
Topic: Acoustic Magic Microphone
Posted By: Sixwheels
Subject: Acoustic Magic Microphone
Date Posted: 14/Mar/2012 at 6:08pm
I'm definitely directing this question toward Marty because not only does he know a lot about this sort of thing, but I bought both an Acoustic Magic Microphone and a USB Sound Pod from Emicrophones in the past. So here's my question: is it better to plug this microphone directly into a line-in plug on a sound card, or use the sound pod? Which produces the best results? 
|
Replies:
Posted By: mmarkoe
Date Posted: 14/Mar/2012 at 7:40pm
The Voice Tracker passes audio at Mic level input, not line level. Line level requires a pre-amp to boost the signal. Sound cards on computers almost always use Mic level input. You can use the Mic in on the sound card if you know the sound card is well shielded and does not pickup electronic noise from within the computer. A USB sound pod like the Andrea USB pod, assures purest audio as the audio is injected into the Central Processing Unit thus bypassing electronic noise with the computer enlclosure. Marty ------------- Marty Markoe, MVP Microsoft Valued Partner See us at: http://www.mymsspeech.com |
Sixwheels wrote:Posted By: Sixwheels
Date Posted: 15/Mar/2012 at 6:05pm
|
Thank you kindly, Marty. That is exactly the information I was looking for. For the longest time I have been having a particular issue with all USB microphones, but specifically the Buddy Desktop Microphone. Any Input VOL above 10 causes a serious lag when you tell Speech Recognition to start listening. Often I will set the Input VOL, and SNR, all the way down to zero, and the microphone(s) still work. Is that normal? Another thing is that I still have the problem where Speech Recognition shuts off apparently because the buffer fills up, but I know that the Acoustic Magic Microphone does not do that when plugged into the proper port on my mother board's sound input. Is that particular issue only prevalent in USB based microphones?
|
Posted By: mmarkoe
Date Posted: 15/Mar/2012 at 6:35pm
|
Which version of Buddy Desktop? Is it 5G, 6G or 7G? Marty ------------- Marty Markoe, MVP Microsoft Valued Partner See us at: http://www.mymsspeech.com |
Posted By: Sixwheels
Date Posted: 16/Mar/2012 at 6:09pm
|
I'm not really certain, Marty. I have had it for at least two years, though, so it is probably the 5G. Would it be written on the microphone somewhere?
|